This Four Drum Puller with four separate pulling drums and ropes is ideal for distribution conductor installation jobs where light linepulls are required. It can also be used as a pilot line winder.

Standard Features:

• Proven hydraulic pulling system with mechanical clutch for each drum.
  Water-cooled diesel engine
• Infinitely variable linespeed and linepull control.
• Anti-rotation clutch to prevent accidental payout of rope during pulling.
• Four pulling drums, each with capacity for 6,000 ft. of 3/8" diameter synthetic rope.
• Free-wheeling drum disconnect for high speed rope payout.
• Bronze payout disc brakes on each drum.
• Automatic diamond leadscrew levelwind for even spooling of rope on the drum.
• Central operator's position for maximum safety and visibility with engraved console panel.
• Tandem axle trailer for maximum stability with leaf spring suspension.
  93" x 63" cargo area.

PERFORMANCE

• Continuous Torque Rating: 16,800 in.-lbs.
• Intermittent Torque Rating: 18,000 in.-lbs.
• Continuous Linepull Rating: 1,400 lbs. with 6,000ft. of 3/8'' rope on drum.
• Speed: 0-5mph with Infinite Speed Control

DRUM DIMENSIONS

• Drum Outside Diameter: 24in.
• Drum Width: 32 1/2''
• Drum Core Diameter: 12 3/4''
• Drum Rope Capacity (Synthetic Rope): 6,000ft. of 3/8'' diameter

DRIVE SYSTEM

• Engine: Water-Cooled Diesel
• Hydraulic Drive: Closed Loop Hydrostatic
• Ant-Rotation Drive Clutch: Each Drum, Individual Controls

TRAILER

• Axles: Tandem with Leaf Spring Suspension
• GAWR: 10,400lbs.
• GVWR: 11,600lbs.
• Trailer Brakes: 12x2 Electric on Each Wheel
• Tires: (4) 8.75x16.5LT - 10 ply Rating
• Tow Hitch: 3'' Pintle Eye with 4 Height Adjustments
• Front Jack (1) and Rear Jacks (2): Manual Screw Type with Drop Leg
• Trailer Lighting: 4 Light System
• Cargo Area: 93'' long x 63'' wide

UNIT DIMENSIONS

• Lenght: 16ft. 3/8in.
• Width: 7ft. 5/8in.
• Height: 6ft. 5/8in.
• Weight: 5,500lbs.

GENERAL FEATURES

• 19 Gallon fuel resevoir with level gauge
• 18 gallon hydrolic resevoir with level gauge and temperature gauge
• Operator's protective screen
• Elevated operator's position for full view of pulling operation
• Individual drum clutch controls and bronze disc brakes for payout of rope
• Steel lockable battery box.
• Unit sandblasted, primed and painted with two coats of enamel finish paint.

OPERATOR CONTROLS:

• Direction control lever with infinite speed adjustments and anti-payout stop
• Adjustable pull/tension control with limit if preset tension is reached
• Hydraulic system pressure gauge
• Keyed engine ignition
• Engine throttle control
• Engine choke control
• Permanently engraved operator's control panel